Home > PTFE Molding Powder >

PTFE Molding Powder SF-10GR

Product Categories

Sinof Hi-tech Material Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Name: PTFE Molding Powder SF10GR
Brand: Sinof
Price: 1 USD

Brand Name : Sinof

Model Number : SF-10GR

Place of Origin : China

Contact Now

PTFE Molding Powder (SF-10GR)

Composition: 90% virgin PTFE, 10%±1% graphite powder

Technical Properties

Mechanical Properties	Units	Test Method	Free Flow	NFF
Specific Gravity	g/cm³	ASTM D4894	2.15±0.05	2.15±0.05
Tensile strength	MPa	ASTM D4894	≥18	≥20
Elongation at break	%	ASTM D4894	≥200	≥230
Bulk Density	g/L	ASTM D4894	700±50	/
Hardness	Shore D	NEEDLE	58-53	58-53
Diametric Shrinkage	%	INTERNAL	2.0±0.5	2.0±0.5
Flow	Sec/120g	INTERNAL	≤5	/
Average Particle Size	μm	ASTM D4894	550±100	/
Recommended Molding Pressure	300-350kg/cm²
Max Sintering Temp.	370-375℃

Attention:

This product is a fluoroplastic material. Normal precautions observed with fluoroplastics should be followed.

Packaging, Storage and Transportation:

1. The product is packed in two layers of plastic bags in a hard bucket with a net content of 25kg per barrel.

2. The products shall be transported as non-dangerous chemical. During transportation, prevent from humidity, intense vibration and package damage.

3. Products should be stored in a clean, cool and dry warehouse to prevent the mixing of dust, moisture and other impurities.

PTFE Molding Powder SF-10GR

PTFE Molding Powder SF-10GR Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinof Hi-tech Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!